GBC FusionPunch II Service Manual page 126

ADJ 4.5 Punch Clutch
Eccentric Stop
Purpose
To prevent excessive Clutch rotation, which
could cause double punch or lack of any Clutch
rotation, which would result in no punch.
Prerequisite
Perform REP 4.6, Steps 1 and 2.
Check
Check the Clutch actuation.
Adjust Sequence
1. Rotate the Punch Clutch Housing at the
same time as you press the Punch Stop
Pawl.
2. Check the clearance between the Punch
Clutch Stop Pawl and both stops on the
Punch Clutch Housing (Figure 2).
3. With the Stop Pawl pressed in, rotate the
Eccentric Stop until the clearance between
the Stop Pawl and the Punch Clutch
Housing Stops are 0.05 in (0.5 mm).
ADJ 4.5 Punch Clutch Eccentric Stop
Figure 2.
0.10 in.
0.5 mm
Figure 1.
12/2003
4-30
PUNCH CLUTCH
HOUSING AND
STOPS
STOP PAWL
ECCENTRIC STOP
GBC FusionPunch II Service Manual