GBC FusionPunch II Service Manual page 323

This will display the Tools Mode window, as shown in Figure 6-55.
Chain Link
Number box
Input Chain
Link button
6. Locate the DocuColor 6060 Profiles at the end of this procedure, then enter the NVM # into the Chain Link Number box, please ensure to type in
the full location number. (ie 700072)
7. Press Start and the Current Value will be displayed. To change value, type in the new value and press enter. The New Value will become the
Current Value, after pressing Start.
8. Press the Input Chain Link button to select a different NVM number or use the up/down arrows to move to next number.
9. When finished, press the Close button.
GBC FusionPunch II Service Manual
Figure 6-55 The Tools Mode Window
12/2003
6-51
Current
Value box
New Values
box
Host Machine Enablement (DocuColor 6060)