GBC FusionPunch II Service Manual page 330

8. Hi-light the Profile that you setup by clicking on it, and then select Options, this will bring up a drop down list, now select Activate. If this is
completed correctly, you will see a check mark in the assigned box, as shown in Figure 6-61.
Options
Activate
This completes the Profile Setup; you are now ready to send your jobs to the FusionPunch II.
Host Machine Enablement (DocuColor iGen3)
Figure 6-61 DFA Profile Activation
12/2003
6-58
Hilighted
Profile
Assigned
Check Box
GBC FusionPunch II Service Manual