GBC FusionPunch II Service Manual page 309

DocuSP 3.xxx Print Queue Setup
The following procedure is to help the System Administrator set up Print Queues for the FusionPunch II and other fishing devices that are inline to
the printer.
Note: One print queue is required for the FusionPunch II and one for each additional finishing device down the line, such as a Signature
Booklet Maker (SBM).
1. Click the Queue Manager Icon from the DocuSP Main Window, as shown in Figure 6-43.
Queue Manager
Icon
GBC FusionPunch II Service Manual
Figure 6-43 The DocuSP Main Window
12/2003
6-37
DocuSP 3.xxx Print Queue Setup