GBC FusionPunch II Service Manual page 359

Tag Numbers
Tag #: P4
Class: O (Optional)
MFG Serial Numbers: NA
Name: Short Edge Punching Kit
Purpose: This kit enables Short Edge punching of
8 ½ x 11, A4, 8 ½ x 14, and 11 x 14 paper.
Retrofit Kit #: 7610522
Reference: Parts included in Kit
Part Number Description .................................................Qnty
7610525 Bracket, SE, Paper Guide.................................. 1
7610524 Paper Guide Weldment, SE............................... 1
7610289 Spring Bar Holder .............................................. 1
7610334 Static Brush........................................................ 1
1914082 Thumb Screw..................................................... 3
7610508 Eprom (Version A531 or higher) ........................ 1
Description of change:
Part Number Description of change
7610525 Added Short edge Side Guide Bracket.
7610524 Added Short edge Side Guide.
7610289 Changed Spring Bar Holder to allow the
mounting of the Short edge Side Guide.
7610334 Changed Static Brush to allow the mounting of
the Short edge Side Guide.
1914082 Added Thumb Screws to mount and adjust new
Short edge Side Guide.
7610508 New Eprom (Version A531 or higher) allows
selection of new Run Modes.
GBC FusionPunch II Service Manual
Date: 02/26/03
12/2003
6-87
Tag Numbers