GBC FusionPunch II Service Manual page 296

GBC Punch Short Edge Queue Output
a
d
e
f
g
h
Figure 6-28 The Print Queue Output Window
6. Refer to Figure 6 - 28 above and fill in or choose the fields, as
specified in the table below, for a GBC Punch SE Queue output.
Item
a 2-Sided (Do not check the override option)
b
c Check the Override option
d
e Check the Override option
f
g Check the Override option
h Click OK, then OK again in new Queue Setup window
Host Machine Enablement (DocuSP)
Entry
System Specified
System Specified
GBC SE
SBM1/SBM2 Queue Output
a
b
d
c
e
f
g
h
Figure 6-29 The Print Queue Output Window (SBM Setup)
7. Refer to Figure 6-29 above and fill in or choose the fields, as specified
below, for an SBM 2-sided Punch Queue output.
Item
a
b
c
d
e
f Same as the name of the Finisher Profile for the
g
h Click OK, then OK again in new Queue Setup window
This completes the Print Queue setup.
12/2003
6-24
Entry
2-Sided (Do not check the override option)
System Specified
Check the Override option
System Specified
Check the Override option
SBM1/SBM2
Check the Override option
GBC FusionPunch II Service Manual
b
c