Tracker Off-Road XTR1000 Service Manual page 13

REMOVING HEADLIGHT ASSEMBLY
1. Remove hood.
2. Remove the headlight retaining knob.
XX069A
3. Remove the wiring harness connectors. Remove the
retainers on both sides of the headlight assembly that
secure the headlight assembly.
XX070
XX071
4. Headlight assembly mounts in a C-shaped channel.
Slide headlight assembly toward the rear of the vehi-
cle to release from the channel.
5. Remove headlight from rear housing of headlight
assembly by turning counterclockwise.
12
XX072A
INSTALLING HEADLIGHT ASSEMBLY
1. Install headlight bulb from rear of headlight assem-
bly by turning clockwise.
XX072
2. Headlight assembly mounts in a C-shaped channel.
Slide headlight assembly toward front of vehicle to
mount into C-shaped channel. Install the retainers on
both sides of the headlight assembly that secure the
headlight assembly.
XX070A