Tracker Off-Road XTR1000 Service Manual page 113

10. To replace, install the bearing onto the pinion shaft.
CC882
11. Place the pinion assembly in a bearing puller; then
install the bearing using a press.
CC884
Differential Lock
 NOTE: The pinion gear must be removed in order
to remove the differential lock assembly.
1. Remove the two cap screws for the differential lock
housing.Account for the spring under the housing.
XX422
2. Remove the E-clip.
112
XX423
3. Remove the locker shaft through the pinion gear
housing area.
XX424
4. Remove the shift fork and dog.
XX425
5. Inspect each component for damage.
6. Install in the reverse order as removed.
XX426