Tracker Off-Road XTR1000 Service Manual page 23

XX107
2. Install rocker panel upward toward vehicle body.
Install push pins and cap screws securing the rocker
panel to frame.
REMOVING FRONT FENDERS
1. Remove fender flare fasteners. Remove fender flare
being careful of the tabs at the rear of fender.
XX099
XX476
2. Remove hood. (see Removing/Installing Hood in
this section).
3. Remove fender fasteners. Lift slightly on the front
and pull toward front of vehicle.
22
XX100
INSTALLING FRONT FENDERS
1. Align tabs on rear portion of fender into slots.
XX101
2. Install fender fasteners securing fender.
XX100
3. Place fender flare into position being careful of the
tabs at the rear of fender; then install fender flare fas-
teners securing fender flare.