Tracker Off-Road XTR1000 Service Manual page 22

XX090
4. Install the rear upper front fender. Secure with cap
screws.
XX085D
XX088
XX087
XX086
REMOVING SIDE PANELS
To remove a side panel, remove the cap screws and push
pins securing the side panel to the frame; then remove the
panel. Front and/or rear fender removal will make side
panel removal easier.
XX098
INSTALLING SIDE PANELS
Front and/or rear fender removal will make side panel
installation easier. Install the cap screws and push pins
securing the side panel to the frame.
XX098
REMOVING/INSTALLING ROCKER
PANELS
1. Remove push pins and cap screws securing the
rocker panel to the frame. Remove rocker panel
downward.
21