Tracker Off-Road XTR1000 Service Manual page 29

XX103
3. To install seat, align the front of the seat frame to the
approximate mounting location in front of gas tank
and align the pins on the rear of the seat assembly
with the eyelet. Push to the rear of the vehicle on the
seat frame seating the pins into the eyelets.
XX103A
4. Install the two screws located near the floor in front
of the seat frame.
XX102
Doors
REMOVING
Inspect the doors for broken or bent tubes, hinges, or
latches. Make sure the latches engage and lock securely.
1. Remove cap screws securing the outer door skin.
28
XX096
2. Remove the fasteners securing the door to hinge.
XX097
INSTALLING
1. Install the cap screws from the interior side of the
door; tighten cap screws securing the door to hinge.
XX097
2. Attach outer door skin to door. Install and tighten cap
screws securing outer door skin to door.
XX096