Table of Contents
Advertisement
XX453
XX450A
XX452
5. Disconnect the cooling fan electrical connectors and
note the location of any straps securing the electrical
connectors.
XX447
6. Remove the two cap screws securing the upper radia-
tor bracket to the frame; then remove the upper radi-
ator bracket; then remove the inner headlights from
the headlight housings on both sides.
72
XX447A
XX448
XX449
7. Remove the radiator/fan assembly from the vehicle
by lifting vertically.
NOTE: If the radiator is to be replaced, transfer the
cooling fans, coolant hoses, coil, and attaching hard-
ware to the replacement radiator.
INSTALLING
1. Place the assembled radiator/fan assembly into posi-
tion; then close the drain at the bottom of the radia-
tor.
2. Connect the coolant hoses to the radiator; then
tighten clamps securing hoses to radiator.
3. Position the upper radiator bracket to the frame; then
install the two cap screws securing the radiator
bracket to the frame.
Advertisement
Table of Contents
Troubleshooting
