Tracker Off-Road XTR1000 Service Manual page 115

XX391
2. With the bushing in place, install the upper differen-
tial mount cap screw using a new lock nut. Tighten to
35 ft-lb (47.6 N-m).
XX387
3. With the bushings in place, install the lower differen-
tial mount cap screws using new lock nuts. Place a
spacer on each side of the differential for both lower
mounts. Tighten to 35 ft-lb (47.6 N-m).
 NOTE: The spacers go between the mounting
brackets and the front differential on both sides of
both lower mounts.
XX388
114
XX389
4. Using a new lock nut, install the two cap screws into
the rear of the subframe. Do not tighten.
XX386
5. Tighten the front subframe mount cap screws to 65
ft-lb (88.4 N-m). Then tighten the rear cap screws to
65 ft-lb (88.4 N-m).
XX390
6. Using blue Loctite #243, secure the steering rack
bracket to the subframe. Tighten to 20 ft-lb
(27.2 N-m).