Body Panels - Tracker Off-Road XTR1000 Service Manual

CLEANING AND INSPECTING GRILLE
Clean any dirt or debris from the grille webbing. This
helps air flow to the radiator.
INSTALLING GRILLE
Place the grille into position and secure it using the exist-
ing cap screws. Tighten all hardware to 60 in.-lb.

Body Panels

REMOVING REAR FASCIA
1. Remove the rear cargo tray.
2. Remove the wire harness connected to the taillights.
Taillight removal is not required to remove rear fas-
cia.
! WARNING
The heat deflectors under the rear cargo tray have sharp
edges and can cause serious injury if care is not taken.
3. Remove the cap screws securing the rear fascia.
Remove rear fascia.
VOR-475
REMOVING REAR FENDERS
1. Remove rear cargo tray.
2. Remove rear fascia.
3. Remove cap screws securing rear upper front fender.
Remove rear upper front fender.
18
XX085D
XX088
XX087
XX086
4. Remove the cap screws securing the rear upper
fender. Remove rear upper fender.