Deluxe Bimini Top; Front Bumper; Rear Bumper - Tracker Off-Road XTR1000 Service Manual

Deluxe Bimini Top

REMOVING/INSTALLING
1. Loosen all four straps at each corner of the ROPS;
then disconnect all four straps from the clamps at
each corner of the ROPS.
XX477A
XX478
2. Unfasten the strap on the front portion of the ROPS;
then remove the Deluxe Bimini Top.
XX479
3. Position the Deluxe Bimini Top into position and
connect all four straps to the clamps at each corner of
the ROPS; then tighten all four straps at each corner
of the ROPS .
4. Fasten the strap on the front portion of the ROPS .

Front Bumper

REMOVING/INSTALLING
1. Remove the four cap screws and two lock nuts secur-
ing the front bumper. Remove the front bumper.
VOR-380
2. Position the bumper into place; then install the four
cap screws and two lock nuts.

Rear Bumper

REMOVING/INSTALLING
1. Remove the six cap screws securing the rear bumper.
Remove the rear bumper.
VOR-402
2. Position the bumper into place; then install the six
cap screws.
29