Table of Contents
Advertisement
Operation
3-12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Start Up
Follow the instructions in
make all electrical and plumbing connections.
If you see an error message when starting the
detector, refer to page 3-15.
Wake-Up Displays
1
Turn on the detector by pressing the rear-panel
MAINS switch. The POWER light illuminates.
2
Press the front panel LAMP ON/OFF key.
You'll see:
After several seconds, the UV lamp ignites.
Then you'll see:
The detector locates the 656 nm line for
wavelength calibration and then locates the
last-used wavelength.
3
Section 2,
Installation, to
Advertisement
Table of Contents
