Front Panel; Start Up - Gilson VERITY 1741 User Manual

Front Panel

The front panel of the detector contains a display and a keypad.
Figure 13
VERITY® 1741 UV-VIS Detector - Front View
NO. DESCRIPTION
1 Front power switch
Status LED lights:
LAMP indicates the lamps are on (green).
2
RMT indicates that the detector is connected to the remote control (orange).
ERROR indicates an error (red).
3 Display
4 Keypad
5 LAMP key for turning lamps on for use with front panel control

Start Up

1. Follow the instructions in Chapter 2 | Installation to make all rear panel and plumbing connections.
2. Ensure that the detector and the router are connected to a power source.
3. check flow cell connections for leaks and fix, if necessary.
4. Switch the main power oN using the switch on the rear panel.
5. Switch the detector oN using the switch on the front panel.
6. If using front panel control, press the laMp key to turn on the lamps. For instructions about
using the front panel control, refer to Appendix B | Front Panel Control on page 37.
NOTE
When the VERITY 1741 Detector is under TRILUTION LC control, the front panel keypad is locked.
|
20
oPERaTIoN VERITY® 1741 UV-VIS DETEcToR