Gilson 155 User Manual page 151

Appendix
FP B
FR B
h I
I I
D-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Pauses the currently executing file.
Resumes the currently paused file.
Identifies the editable field that has the focus. If the focus is
at an editable field, returns "b,e,c" where:
b - Index of the beginning character of the editable field
e - Index of the last character of the editable field
c - Index of the cursor
The index is a number from 0 to 159 that identifies a location
on the display. Index numbers 0 to 39 are on the first line of
the display, 40 to 79 are on the second line of the display, 80
to 119 are on the third line of the display, and 120 to 159 are
on the fourth line of the display.
If the focus is not at an editable field, the detector returns a
"|" (vertical bar).
Example 1. A response of "092,092,092" indicates that the
editable field is one character wide, and located on line 3,
column 13 of the display. The cursor is located on line 3,
column 13.
Example 2. A response of "052,054,053" indicates that the
editable field is three characters wide, and located on line 2,
columns 13 to 15 of the screen. The cursor is located on line
2, column 14.
Determines status of input contacts. Returns "ab", where
"a" and "b" are either "D" (disconnected or open) or "C"
(connected or closed).
a - Status of the autozero contact
b - Status of the remote event contact
For example, the detector returns "DD" if both contacts are
open or disconnected.
D