Gilson 155 User Manual page 80

Operation
3 Type 0.01 and press ENTER.
4 Press Add to insert the event into the file. You'll
see:
Run the file
Now each time before you use the detector, run the
file you created above. To do this:
1 Access the file mode as described on page 3-42.
2 Type the number of the file.
3 Press Run.
The operating conditions for your analysis are
automatically loaded into the detector's memory and
the detector sets the baseline for each wavelength to
zero.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3
3-47