Baud Rate - Gilson 155 User Manual

Installation

Baud Rate

As a default, the baud rate is set to "External,"
indicating that the detector is a slave device in a
Gilson system and the baud rate is being clocked
outside of the detector.
Other baud rate selections are available if the
detector is being controlled by non-Gilson
applications.
0 - External (default)
1 - 19200
2 - 9600
3 - 4800
4 - 2400
5 - 1200
6 - 600
7 - 300
8 - Reserved
9 - Reserved
To change the baud rate if the detector is being
controlled by a non-Gilson application:
1 Gently insert a small flat blade screwdriver into
the SW2 selector on the rear panel and turn it.
2 Align the white dot with one of the indicated
numbers.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2
2-11