Front Panel Diagram - Gilson 155 User Manual

Operation
1 LAMP ON/OFF
2 Status indicators
3 Display
3-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Front Panel Diagram

Following is a diagram and description of the front
panel for a 155 Detector. If you have a 156
Detector, your front panel only includes the LAMP
ON/OFF key and the status indicators.
Press this key to turn the UV and visible lamps on
and off. Do not confuse this key with the rear
panel MAINS switch which should always remain
on.
The POWER indicator illuminates when the rear
panel MAINS switch is in the ON position.
The UV or VIS indicator illuminates when the
corresponding lamp is lit.
The ERROR indicator flashes when there is a
problem; for example, a lamp did not light. If one
of the lamps is causing the error, its corresponding
UV or VIS indicator will flash simultaneously with
the error indicator.
The REMOTE indicator illuminates when the
detector is being externally controlled and the lock
front panel command has been issued.
Shows modes, parameters, commands, and data.
A highlight identifies the parameter that is
currently selected on the display.
3