Table of Contents
Advertisement
Operation
Change wavelength and sensitivity
To change the wavelength and sensitivity:
1
At the Select the type of event to add display, press
Single to select the single wavelength mode. You'll
see:
2
Press the down arrow key. You'll see:
3
For the minutes parameter, press 2.5 on the
keypad and press ENTER.
4
For the wavelength parameter, press 320 on the
keypad and press ENTER.
5
Press Add to insert the timed event.
6
At the display showing timed events, press Add
to insert another event.
7
At the Select the type of event to add display, press
Single to select the single wavelength mode. You'll
see:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3
3-53
Advertisement
Table of Contents
