Second Display For Setup Mode; Uv Lamp Alarm - Gilson 155 User Manual

Operation

Second Display For Setup Mode

Following is a description of the parameters on the
second display for setup mode. When you're
finished checking or changing parameters, press
the Next soft key to reveal the next display for
setup mode.
Parameter

UV lamp alarm

Vis lamp alarm
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Description
The detector's status indicators flash when the UV lamp
has been in use for the specified number of hours. To
enable the lamp alarm, specify a number from 1 to 9999.
To disable the lamp alarm, specify 0.
The detector's status indicators flash when the visible lamp
has been in use for the specified number of hours. To
enable the lamp alarm, specify a number from 1 to 9999.
To disable the lamp alarm, specify 0.
3
3-17