Unpacking - Gilson 155 User Manual

1
Introduction

Unpacking

Unpack the detector and its accessories carefully
from the carton.
Open the detector door and remove the foam insert
from inside the detector.
Cross-check the contents against the checklist below
and against your packing slip, to verify that all parts
are included and undamaged. Do this now, even if
the detector will not be used immediately. Many
carriers must receive concealed damage claims
within seven days of delivery.
The detector is shipped with its flow cell, lamps,
and inlet/outlet tubing already installed. The
carton should also contain:
• power cords
• fuse drawers and fuses
• two Pomona recorder cables
• autozero/event cable
• GSIOC cable
Note: The three black-headed shipping screws in
the bottom of the instrument that secure the optical
assembly during shipment must be removed from
the bottom of the instrument before you use the
detector. Save these screws in case you need to ship
the unit.
1-3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com