Example 1: Startup File - Gilson 155 User Manual

Operation

Example 1: Startup File

This tutorial shows you how to create a sample
program file. You'll set up a file that contains
detection and setup parameters that you want to
use each time you operate the detector. If you run
this file before using the detector, you can be
assured that the parameters you use today are the
same as those used yesterday.
Set Mode conditions
Before you create the file, review the setup and
detection conditions for the mode in which you
operate the detector. Do this now because these
parameters are automatically saved to the program
file when it's created.
Access file mode and create file
After setting setup and detection parameters:
1 If necessary, access the first display for the
detection mode in which you operate the
detector.
2 Press Mode. You'll see:
3 To access the file mode, press File. You'll see:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3
3-45