Troubleshooting
5-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Troubleshooting
Detector Not Functioning
• Check cord and power connection.
• Fuses may be blown. Refer to
on page 4-35.
If the problem persists, contact the Gilson Customer
Service Department (refer to page
information) or contact your Gilson representative.
A Lamp Fails to Ignite/A Lamp Fails
While On
• Check for loose lamp connector or replace lamp.
Refer to
Lamp Maintenance
If the problem persists, contact Gilson Customer
Service (refer to page
5-10
or contact your Gilson representative.
Status Lights Blinking/Screen Blank
or Dark
• Turn off the detector (MAINS switch). While
pressing the LAMP ON/OFF key, turn on the
detector (MAINS switch).
Note: This will clear all user-entered parameters
and the detector resets to its factory default.
5
Fuse Replacement
5-10
for contact
on page 4-22.
for contact information)