Gilson 155 User Manual page 114

Maintenance
Disconnect visible lamp connector and
remove lamp
1 Locate the visible lamp.
2 Follow the visible lamp's wires to locate the
connector that links the wires to the internal
circuit board. Disconnect the connector from
the internal circuit board.
3 Grasp the visible lamp and turn it until the flat
edge faces upward. Usually, this is just a slight
rotation of the lamp in either direction.
4 Remove the lamp by pulling it away from the
lamp housing.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
4
4-23