Table of Contents
Advertisement
Operation
3-46
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
4
To create program file 1, press 1 on the keypad,
and then press Edit.
Or, if file 1 already exists, choose 0 or a number
from 2 to 9. Then press Edit.
After you press Edit, all of the detection and
setup parameters in the detector's memory are
copied to the file. They are set for time 0.00.
You'll see a display like the following:
5
To scroll through the timed events, press the up
and down arrow keys.
Add a timed event to set the baseline to zero
To the startup file, add a timed event that
automatically sets the baseline to zero.
1
Press Add. You'll see:
2
Press Misc. You'll see:
3
Advertisement
Table of Contents
