Table of Contents
Advertisement
Display Adjustment
You can use the Display View Angle Adjustment feature to improve the readability of text
on the detector's display.
1
Do one of the following:
a) If the detector is not turned on, press the rear-panel MAINS switch.
b) If the detector is turned on and the lamps are lit, press LAMP ON/OFF.
2
Wait until there is no text on the display.
3
Press ESC. You'll see:
4
Press the up or down arrow key to make adjustments. As a recommendation, press
the up arrow key if the detector is located below eye level. Or, press the down arrow
key if the detector is located above eye level.
5
To return to the last-saved view angle, press Cancel.
6
To save the new view angle, press Save.
7
To exit, press ESC.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
F
F-1
Advertisement
Table of Contents
