Delta Electronics AH500 Manual page 180

Motion control module

Hide thumbs Also See for AH500:

Table of Contents

Instruction code

 S: Timer; m: Time; D: Annunciator

 The instruction ANS is used to drive an annunciator.

E xp la nat io n

 S: T0~T183

 The instruction supports V devices and Z devices. (If the 16-bit

 If X0.3 is ON for more than 5 seconds, the annunciator S999 will be ON.

Pulse instruction 16-bit instruction (7steps) 32-bit instruction

m: K1~K32,767 (Unit: 100 ms)

D: S912~S1023

See the explanation of ANR for more information.

instructions used, Z devices can not be used. If the 32-bit instruction is

used, V devices can not be used.)

Even if X0.3 is turned OFF, S999 will still be ON. (However, T10 will be

reset to OFF, and the value of T10 will be 0.)

Ch ap te r 5 Ap plie d Instruc tions

Driving an annunciator

Chapters

Table of Contents