Delta Electronics AH500 Manual page 134

 States of devices
E xamp le 2
Y devices,
M devices,
S devices
10
millisecond
timers
C0~C234
Applied
instructions
*1:Y0.1 is a dual output. When M0 is OFF, Y0.1 is controlled by M1. When
5 - 1 9
States of contacts
Device before the
execution of CJ
M1, M2, and M3
are OFF.
M1, M2, and M3
are ON.
M4 is OFF.
M4 is ON.
M6 is OFF.
M6 is ON.
M7 and M10 are
OFF.
M7 is OFF. M10 is
ON/OFF.
M11 OFF
M11 ON
M0 is ON, Y0.1 is controlled by M12.
Ch ap te r 5 Ap plie d Instruc tions
States of contacts States of output
during the coils during the
execution of CJ execution of CJ
M1, M2, and M3
Y0.1
are turned from
S1 are OFF.
OFF to ON.
M1, M2, and M3
Y0.1
are turned from
S1 are ON.
ON to OFF.
M4 is turned from The timer T0
OFF to ON. does not count.
The timer T0
stops counting
immediately.
M4 is turned from
When M0 is
ON to OFF.
turned from ON
to OFF, the timer
T0 is reset to 0.
M6 is turned from The timer T240
OFF to ON. does not count.
The timer T240
stops counting
immediately.
M6 is turned from When M0 is
ON to OFF. turned from ON
to OFF, the timer
T240 is reset to
0.
The counter C0
M10 is ON/OFF.
does not count.
C0 stops
counting. After
M0 is turned
M10 is ON/OFF.
OFF, C0 will
resume
counting.
The applied
M11 is turned
instructions are
from OFF to ON.
not executed.
The applied
instructions
which are
skipped are not
M11 is turned
executed, but
from ON to OFF.
API 53~API 59
and API
157~API 159 are
still executed,
*1
, M20, and
*1
, M20, and