Using The St5; I Getting Sound - Yamaha Silent Brass Personal Studio ST5 User Manual

Using the ST5

After you have finished making connections, set the
power switch to its "ON" position.
The ST5 is capable of adding a wide variety of effects
to the pickup mute/mic signal received via the ST5's
INPUT jack. The ST5 also provides programs (50
preset, 50 user) that are made up of various effects
combinations so first, try and experiment with these
programs.
* Make sure the volume is set to its minimum level before op-
erating the power switch.
14

I Getting Sound

1 Set the power switch to its "ON" position.
The current Effect Program Name and Program Num-
ber will be appear in the display. (This is referred to as
the Play mode.)
Power
Switch
Effect Program Name
2 Play your instrument.
While playing, use the Value Dial to adjust the output
level (Master Level).
Master Level
* If the sound is distorted, set the Input Level Switch to the
"Hi" position, then try adjusting the Master Level once
again.
Program Number
Value Dial