Voice Setup; Phrase Name - Yamaha Mobile Owner's Manual

VOICE SETUP

The Phrase Voice Setup Editor is used to select a voice for the phrase.
It can be opened by tapping [VOICE SETUP] in Step 4 above.
Area 1 is used to select the voice category; Area 2 the desired voice.
Area 3 is used to restore the original voice.
Area 4 is used to randomize the voice selection in Area 2.
Mobile Music Sequencer Owner's Manual
OTHER
The Other Setting Editor is used to set a name and category for the phrase.
It can be opened by tapping [OTHER] in Step 4 above.
Tap in the name field to bring up the keyboard and then enter a

PHRASE NAME

name for the phrase.
Use this to select a category for the phrase.
CATEGORY
LENGTH Use this value to set the length of the phrase in measures.
TRANSPOSE If you need to transpose the phrase, you can set the required
number of semitones here.
PHRASE PLAY LOOP: The phrase will start again from the beginning after it has
played to the end.
ONE SHOT: The phrase plays once to the end and then stops.
14