Avaya Call Server Configuration; Configuring A Standalone Station; Configuring An Associated Station - Avaya 3600 Series Configuration And Administration Manual

Avaya, Inc.

4. Avaya Call Server Configuration

You can configure the 3600 Series Wireless Telephones as a stand-alone station or associate it with a
desk station. When the 3600 Series Wireless Telephones are associated with a desk station, the user
can make and handle calls from either the 3600 Series Wireless Telephones or the desk station.
4.1

Configuring a Standalone Station

To configure 3600 Series Wireless Telephones as a stand-alone station, you must add a station on the
Avaya Call Server for the 3600 Series Wireless Telephones.
To administer a stand-alone station on the Avaya Call Server for a Wireless Telephone:
1. From the Avaya Call Server administration software, add a new station.
2. Set "Type" to "4612."
3. Administer a station security code.
4. Complete the remainder of the station form as you would for a desk station.
5. Repeat Steps 1 through 5 for each stand-alone Wireless Telephone.
4.2

Configuring an Associated Station

To configure 3600 Series Wireless Telephones as an associated station, you must add a station on the
Avaya Call Server for the 3600 Series Wireless Telephones and then associate that station with a desk
station.
To administer an associated station on the Avaya Call Server for a Wireless Telephone:
1. From the Avaya Call Server administration software, add a new station.
2. Set "Type" to "4612."
3. Set "Security Code" to the same security code used for the extension to which this Wireless
Telephone will be associated (that is, the desk station). You can use a different security code,
but to make it easier for the user it is recommended that you use the same security code as the
desk station.
4. Set "Message Lamp Ext" to the extension of the associated desk station.
5. Set "Bridged Call Alerting" to "y."
6. Set "Auto Select Any Idle Appearance" to "y."
7. For Button Assignments, create bridged appearances to the line appearances on the desk
station.
8. Add additional feature buttons to unassigned buttons, if desired.
9. Repeat Steps 1 through 8 for each Wireless Telephone.
When making changes to feature buttons, the phone must be power
cycled.
21-300352, Issue 2, July 2005
Configuration and Administration—AVAYA 3616/3620/3626 WT
Avaya CCMS IP, Avaya Call Server, with Avaya 4612 IP Telephone Emulation
Page 17