Chapter 6: Prepare for Configuration
Before you prepare the G250 for configuration, ensure that you load the completed Electronic
Pre-Installation Worksheet onto the laptop. You should also load any CM license and
authentication files and any firmware files that you have prepared onto the laptop.
Preparations for configuration differ depending on whether your G250 contains an S8300
Server. This chapter describes both options.
Preparing a G250 with an S8300 server
Use the Avaya Installation Wizard (IW) to configure the G250 with an S8300.
1. Connect a laptop computer to the Services port of the S8300, using a crossover cable.
2. Make sure the laptop is configured as follows:
IP Address: 192.11.13.5
●
NetMask: 255.255.255.252
●
Disable DNS
●
Clear the primary WINS and secondary WINS IP Addresses
●
Disable the Proxy Server in the Internet Explorer
●
3. Launch Internet Explorer on the laptop and type the following URL to access the S8300
Server Home Page: http://192.11.13.6.
The welcome screen for Avaya Integrated Management appears.
4. Click Continue. The Logon screen for Integrated Management appears.
5. Enter the appropriate login name and password.
6. Ask a customer representative for a login name and password that the customer would like
for the superuser login. If you are a business partner, you can also repeat this procedure to
add the dadmin login.
Note:
Make sure the customer can change this login, its password, or its permissions
Note:
later.
7. From the Integrated Management main menu, select Launch Maintenance Web Interface.
Issue 5 November 2009
27