Operation
I
Configuring the RAID array, see the documentation of the RAID
controller, used in your configuration, see section
overview" on page
6.2.2
Installing 2.5-inch HDD/SSD modules
6.2.2.1
Removing a 2.5-inch HDD/SSD dummy module
Figure 30: Removing a 2.5-inch HDD/SSD dummy module
Ê Press both tabs together (1) and pull the dummy module out of its bay (2).
V
CAUTION!
Keep the dummy module for future use.
Always replace dummy modules into unused HDD/SSD bays to comply
with applicable EMC regulations and satisfy cooling requirements.
86
13.
Operating Manual
"Documentation
RX2540 M5