Netiron Xmr Routers - Brocade Communications Systems MLX Series Installation Manual

Hardware features

NetIron XMR routers

NetIron XMR Series routers are available in the following models:
•
NetIron XMR 4000: 4 interface slots (see <Link>Figure 5 on page 6).
•
NetIron XMR 8000: 8 interface slots (see <Link>Figure 6 on page 7).
•
NetIron XMR 16000: 16 interface slots (see <Link>Figure 7 on page 8).
•
NetIron XMR 32000: 32 interface slots (see <Link>Figure 8 on page 9).
The following sections described the components you can install in the router slots. For a detailed list of components that ships with each
router, refer to the appropriate installation section for each router.
NetIron XMR 4000 router components
You can install the following components in the router slots:
•
Up to two management modules (one active and one redundant).
•
Up to three switch fabric modules.
•
Up to four interface modules.
•
Up to three power supplies (AC or DC).
<Link>Figure 5 displays the NetIron XMR 4000 router.
FIGURE 5 NetIron XMR 4000 router
1 Interface slot 2 4
2 Switch fabric slot 2 5
3 Switch fabric slot 3 6
NetIron XMR 8000 router components
You can install the following components in the router slots:
•
Up to two management modules (one active and one redundant).
•
Up to three switch fabric modules.
6
ESD connector 7 Interface slot 3
Interface slot 1 8 Management slot 1
Switch fabric slot 1 9 Management slot 2
10 Interface slot 4
11 -13 Three power supplies
installed in rear of
device
Brocade MLX Series and Brocade NetIron XMR Installation Guide
53-1004195-02