Honeywell SC Series Installation Instructions Manual

Installation Instructions
Models SC2000, SC2001, SC3004
Signal Conditioning Self-Calibrating Digital Indicators
WARNING
The operator of this instrument is advised that if equipment is
used in a manner not specified in this manual, the protection
provided by the equipment may be impaired.
Failure to comply with these instructions could result in
death or serious injury.
Test and Measurement
SC2001
WARNING
PERSONAL INJURY
DO NOT use these devices as safety or emergency stop
devices, or in any other application where failure of the
product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
CAUTION
Only qualified, service-trained personnel who are aware of the
hazards involved should remove the cover from the instrument
or connect external wiring to the instrument.
Rev. G
008-0608-00
SC2000
SC3004