Safety Instructions - Honeywell SM-RI-X Instruction Manual

1. Safety instructions


WARNING!
Danger of electrostatic discharge – only use a damp cloth to clean.
 WARNING!
If there is danger that the device can be damaged from falling
(pointed, sharp-edged or heavy) objects, the operator must protect
the device.
 WARNING!
Exposure to danger which can result from a chemical reaction
between parts of the meter and chemical substances in the vicinity
must be discussed with the manufacturer and the cause must be
eliminated.
 WARNING!
The meter must be included in the equipotential bond by
connecting it to the grounded pipeline.

WARNING!
If you wish to add odorants or use solenoid valves, please always fit
them downstream of the meter only. Otherwise, the device may be
damaged.

WARNING!
The gas must not contain suspended particles > 50 µm. In
addition, the gas must be dry. Otherwise, the meter may be
damaged.

INFORMATION!
The flow through the meter must be free of vibrations and
pulsations in order to avoid measuring errors.

INFORMATION!
Compliance with the specified operating and ambient conditions
as indicated on the type label is absolutely essential for safe
operation of the meter and additional equipment.
73024521a © Elster GmbH | All rights reserved. Subject to modification
Honeywell
9