2
Power Interruption Recovery
2.1 Power Interruption During Reprogramming
Power interruption during reprogramming of the flash PROMs aborts the
reprogramming at the point of the power interruption. If such interruption
occurs, see the system screen display and carefully note which board was
being updated when the power interruption occurred. If you have another
board of the same type in the system, then follow the scenario presented in this
chapter.
If power to the system is interrupted during reprogramming of the flash
PROM, turn the power key switch to the Standby position to prevent power
surge to the system when power is restored. See Figure 3-1.
2-1