Configuring The Pcu - Siemens SINUMERIK 840Di sl Commissioning Manual

Directory sharing
Release for network access takes place in the Properties dialog > "Sharing" tab of the
corresponding directory (selection of the directory with the right mouse key)
The directory name is the default name for sharing. If a different sharing name is specified, it
must be stated on activating the directory connection.
Authorization
To allow files to be created in the directory, the appropriate authorization must be set.
Dialog
Dialog: <
OK
16.1.4

Configuring the PCU

The PCU basic software is preconfigured for a PTP network link with the TCP/IP protocol. It
is not possible to establish a network link if changes were made and the following settings
must be made or checked according to Subsection "Configuring External Computer
(Windows XP)":
● TCP/IP protocol
● IP address and subnet mask
● Computer name and workgroup
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Directory
> Properties
Tab: Sharing
☑ Share this folder on the network
☑ Allow network users to change my files
Software installation/update and data backup
16.1 PTP network connection
557