Siemens SINUMERIK 840Di sl Commissioning Manual page 585

Procedure using drag-and-drop
Perform the following actions to transfer a control image (offline) to the hardware using drag
and drop:
1. Open the "online" control system file in the navigation area of the Automation License
2. Select any line from the license information displayed in the object area.
3. Drag the selected line to the control system (online) release the mouse key.
Procedure using menu commands
Perform the following actions to transfer a control image (offline) to the hardware using the
menu command: "Load to target system":
1. Open the "online" control system file in the navigation area of the Automation License
2. To transfer the control image (offline) to the hardware select the menu command License
Result
The license information for the hardware is now identical to the information for the control
image (offline), including the License Key.
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Manager and select the control image (offline).
Manager and select the control image (offline).
Key > Load to target system
17.3 Assigning via Automation License Manager
License management
585