Ethernet communication
7.6 HT 8
7.6.5.3
Overview of traversing keys
The following figure shows an overview of the activation, display and inscription of the data
relevant to the traversing keys
Figure 7-10
Overview of traversing keys
(1) Table of the machine axis numbers
The table is to record the axis numbers of the machine axes on which the traversing keys
are to have an effect.
(2) Table of the machine axis names
The traversing keys are inscribed with the machine axis names recorded in the table by
default, if no machine axis names are defined in the HMI file.
210
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Manual