Restoring The Partitions; Installation Of The Sinumerik 840Di Sl Applications - Siemens SINUMERIK 840Di sl Commissioning Manual

16.4.2

Restoring the partitions

The procedure for restoring partitions C:, E: and F: from a local image file is described in:
References:
/IAM2/ CNC Startup Part 5, Chapter IM8, "Backup and restore data", Backing up/restoring
partitions locally
Select the image file from which the partitions are to be restored in accordance with the
existing SINUMERIK 840Di sl software version:
● Basic software <
After the partitions have been restored, the SINUMERIK 840Di sl applications must be
reinstalled.
16.4.3

Installation of the SINUMERIK 840Di sl applications

Procedure
The installation programs for the SINUMERIK 840Di sl applications saved on D:\INSTALL
are not executed automatically after partition restoration, as was the case during the initial
boot. To do this manually in the correct sequence, proceed as follows:
1. On next PCU startup after restoration of the partitions, you are prompted to enter the
● D:\SETUP\APPS
1. Next open directory:
● D:\SETUP\APPS\001
1. Open the following directory as the next step and start the installation program in the
● D:\SETUP\APPS\001\000
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Version
password for the SINUMERIK desktop.
Start the Windows Explorer on the SINUMERIK desktop and open the directory:
The sub-directories contained in directory APPS contain:
– \001 Installation directories of the 1st application
– \002 Installation directories of the 2nd application
– . . . .
– \xxx Installation directories of the xxx th. Application
The numbers in the directory name indicate order in which the applications have to be
installed.
The subdirectories contained in directory \001 contain:
– \000 Installation directory of the application
– \001-\xxx Installation directories of options, patches,etc.
The numbers in the directory name indicate order in which the installation programs have
to be run.
directory (SETUP.EXE).
Software installation/update and data backup
Date
> < >
16.4 Restoring the as-delivered state
561