Siemens SINUMERIK 840Di sl Commissioning Manual page 566

License management
17.1 Basic principles
License database access
License database access occurs via:
● Direct access
● Customer login
Note
The following is to be taken into account:
• You can obtain a customer login via Siemens A&D Mall at menu item "Registration".
• For browser settings for using the A&D Mall please refer to Subsection "Browser
Various license information
As indicated above, only the license information in the license database represents the
current status regarding a piece of hardware. Differences may arise between the license
information available for a piece of hardware and that of the license database due to:
● Loading older archive data into the NC (data restoration from a series-commissioning file
● assigning licenses to hardware without transferring the modified license information for
As a result, a more limited license requirement (possibly no license requirement) may be
displayed than indicated on the HMI user interface of the control system for a license
requirement alignment by Automation License Manager.
To align the license information, a transfer should be carried out for the current license
information of the license database for the hardware control system (online).
566
The direct access occurs with:
– Delivery note number
– license number
The direct access enables the direct assignment of licenses for which the license
numbers are available, e.g. in the form of a CoL. In the Web License Manager you can
also assign all other licenses provided in relation to this delivery note.
The customer login occurs with:
– User Name
– Password
The customer login enables the assignment of all the licenses available to the user that
are delivered at the time of the login and have not yet been assigned to any hardware.
Here, the license numbers of licenses that can still be assigned need not be directly at
hand, instead these are displayed from within the license database.
The Internet address is:
http://mall.automation.siemens.com/
Currently, access is not yet possible for all countries.
settings for using the A&D Mall" (Page 569).
after a service job)
the hardware control system (online)
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Manual