Configuring The Logic - Siemens SIDOOR ATD4 W Series System Manual

①
②
③
④
⑤
⑥
Figure 4-8
4.3.9.2

Configuring the logic

The free function blocks are configured at the parameter level. The input of a function block can
be linked to any output by entering the output's Q number in the input's REF parameter.
The Q numbers of the outputs can be found in the Overview (Page 92).
The REF parameters can be found in Table 5-38 FBLOCK-REF parameters (Page 201).
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA
Digital and logical input signals (Page 97)
Digital and logical input signals (Page 97)
Special function blocks (Page 98)
Control bits (Page 98)
Discrepancy analysis blocks (Page 99)
Basic blocks (Page 99)
FBLOCK overview
4.3 Extended functions
⑦
Frequency analysis blocks (Page 99)
⑧
On delay block (Page 100)
⑨
Counter block (Page 100)
⑩
Position function block (Page 101)
⑪
Cold storage function block (Page 103)
SIDOOR functions
95