Siemens SINUMERIK 840Di sl Commissioning Manual page 300

PROFIBUS DP Communication
8.10 DP slave SIMODRIVE drives
Frame type
Dialog
Dialog: DP slave properties
OK
NOTICE
The message frame type of DP slave 611U, which is set on the SlaveOM, must match with
the PROFIBUS address set on the NC and the drive:
There is no automatic adjustment!
The following data must agree:
1. SIMATIC configuration of 611U DP slave
2. SINUMERIK 840Di sl NC
3. SIMODRIVE 611 universal
For a detailed description of the different message frame types, please see:
● SIMODRIVE 611 universal and universal E:
● SIMODRIVE POSMO SI/CD/CA
In Chapter "Communication via PROFIBUS DP".
300
Tab: Configuration
Predefined: <Messag frame type>
Frame type
MD13060 $MN_DRIVE_TELEGRAM_TYPE
Parameter P0922 (PROFIBUS message frame type selection)
References:
/FBU/ Function Manual SIMODRIVE 611 universal
References:
/POS3/ User Manual - SIMODRIVE POSMO SI/CD/CA
Description
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Manual