Siemens SINUMERIK 840Di sl Commissioning Manual page 30

General Information on the SINUMERIK 840Di sl
1.1 Overview of SINUMERIK 840Di sl
NOTICE
One of the following connection variants must be used for full back-up protection:
• Variant 1: Connection 1) and 2)
• Variant 2: Connection 3)
Figure 1-2
Configuration
The UPS functionality can be configured in two different ways:
● When using SITOP POWER DC UPS MODULE 15 (see Section "Uninterrupted Power
● With Windows XP standard tools.
Note
If the SINUMERIK user interface HMI Advanced (option) is installed on the PCU, the
application F:\mmc2\hmiexit.exe must be executed with the UPS software, before the
shutdown of the PCU.
30
Possible connections: USV
Supply UPS" (Page 87)) with a special software tool.
Download: http://www.siemens.de/sitop > Further topics: Download Software DC UPS 15
A
Start menu: Start > Settings > Control Panel > Power Options > Tab: UPS
SIEMENS
1)
2)
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Manual