Dependencies Of Profibus Dp Communication - Siemens SINUMERIK 840Di sl Commissioning Manual

8.10.4

Dependencies of PROFIBUS DP communication

The overview example shows the interrelations or interdependencies when configuring the
PROFIBUS DP communication between the components:
● NC
● DP master
● DP slave 611U
Figure 8-23
① NC
The NC writes/reads the axis data to the corresponding I/O area of the PLC/DP master on
the basis of the I/O addresses entered in the following machine data and the message frame
type of the machine axis:
● MD13050 $MN_DRIVE_LOGIK_ADDRESS[ n ]
● MD13060 $MN_DRIVE_TELEGRAM_TYPE[n]
Manual
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Dependencies: NC, PLC/DP master and DP slave (SIMODRIVE 611 universal)
1. Machine axis: I/O address 4100
Message frame type 102
2. Machine axis: I/O address 4140
Message frame type 102
PROFIBUS DP Communication
8.10 DP slave SIMODRIVE drives
303