NC Commissioning with HMI Advanced
11.11 NC/PLC Diagnosis
Apply changes
To apply the changes you have made, press the "Accept" softkey. The message box that is
then displayed has to be acknowledged again with the "Accept" softkey.
The "Cancel" softkey rejects all changes and displays the original settings again.
Figure 11-36 Applies settings.
NOTICE
We urgently recommend creating a series startup file before changing the data described
above. See Chapter "User data backup/Series Statup" (Page 541).
492
Commissioning Manual, 05/2008, 6FC5397–4CP10–4BA0
Manual